Effortless manual operation. Intuitive smart control. Enjoy seamless switching and uninterrupted performance, even when the power goes out.
• It is equipped with obstacle detection. The motor automatically stops once obstacles are detected to protect the blind and related belongings.
• The sensitivity level of obstacle detection is adjustable with a total of 10 options. Level 6 is set as the default sensitivity after factory reset.
• The obstacle detection and auto-reverse function for mid-travel obstacles can be enabled or disabled via remote control. This function is enabled by default after the upper and lower limits are set.
• It adopts high-precision gear structure and sound-absorbing materials. The patented design effectively reduces motor noise.
• Designed with soft start and soft stop, it delivers quiet and smooth operation with zero impact and zero jitter.
• High-speed, medium-speed and low-speed modes are optional for the motor.
• Pull the blind upward or downward by 5–10 cm and then release your hand; the blind will travel in the pulling direction.
• If you pull the blind more than 30 cm, the blind will not move further and stay where you release it.
• When the blind is running upward or downward, pull the blind 5–10 cm along its moving direction and release. The blind will stop at the position where you let go.
• The manual pull start function of the motor can be enabled or disabled. When enabled and the blind is stationary, pulling the blind downward triggers automatic downward movement. When disabled, manual pull commands are not responded to. Users may enable or disable this manual pull start function via the remote controller.
• The manual pull start function is enabled by default after the upper and lower limits are fully set. This function remains disabled if the upper and lower limits have not been set completely. Manual pull start will only be activated once the limit setting is finished, or after power is re-supplied and the stroke is repaired by obstacle detection at the upper limit.
• Setting for automatic stop triggered by obstacle when the blind hits the upper stopper at upper limit.
• Manual setting of lower limit.
• A maximum of two limit points can be set.
• The motor features three adjustable speed levels including low, medium and high. The operating speed can be adjusted via the remote controller.
• The default speed is medium. The speed increases upward step by step. After reaching the highest speed, further adjustment switches the speed back to low.
• If the upper limit is set via obstacle triggering and the lower limit is set using the button on the back of the remote control, the motor will operate in jog mode for both upward and downward travel after complete power loss and subsequent power reconnection. You need to run the motor upward until it stops upon hitting an obstacle, and the stroke will be restored successfully.
• If both upper and lower limits are set with the button on the back of the remote controller, the upper and lower limits need to be reset. Manual pull cannot activate automatic movement when stroke fails to recover after power loss.
• By connecting wind and sun sensors, the system automatically adapts to weather conditions. It provides comprehensive sun protection in summer and prevents heat loss in winter.
• Reserved intelligent module: supports intelligent voice control compatible with mainstream smart speakers and voice assistants, mobile APP control, and smart panel control.
• This product boasts an IP64 protection grade, enabling safe and reliable outdoor application.
• Adopting multi-layer sealing technology as well as multiple anti-corrosion and anti-rust coating processes, the product delivers outstanding waterproof performance and can withstand wind and rain reliably for outdoor use.
| Model No | AM45G-4/25-ZS-E-LT | |
|---|---|---|
| Power/Current | 50W / 0.4A | |
| Color | Yellow | |
| Control Mode | Manual Pull Operation / Remote Control（ASK 433.92MHz）/Dry Contact | |
| Rated Torque | 4Nm | |
| Rotational Speed | 20rpm / 25rpm（default）/ 30rpm | |
| Duty Cycle | S2 4min | |
| Protection Grade | IP64 | |
| Insulation Class | Class H | |
| Operating Temperature | -10℃~+65℃ | |
Copyright 2026 © GUANGDONG A-0K TECHNOLOGY GRAND DEVELOPMENT CO.,LTD.
粤ICP备12056067号 All Rights Reserved. Designed Privacy Policy
